1. Home
  2. JosS Product Catalogue
  3. PELOX
  4. Pickling & Passivation
  5. Immersion Pickling
  6. PICKLING SOLUTION T-100 Concentrate 1:1

PICKLING SOLUTION T-100 Concentrate 1:1

A concentrated immersion pickling solution for stainless steel, to be diluted 1:1 with water for efficient removal of scale, corrosion, and discoloration in large-volume treatments.

Category:

PICKLING SOLUTION T-100 Concentrate 1:1

Immersion Pickling Solution – Concentrate (Dilution 1:1)
For the chemical treatment of stainless steel surfaces via immersion.

  • Delivered as a concentrate – dilute 1:1 with water before use

  • Removes oxide discoloration, corrosion, scale, and foreign inclusions

  • Chloride-free and applicable in circulation systems

  • Long bath life with stable acid concentration when maintained properly

  • Adjustable with sharpening agents for specific requirements

  • Produces metallic-clean results with matte to satin surface finish

  • Reaction time: 30 to 360 minutes depending on conditions

  • Suitable for austenitic stainless steel, Duplex, and Superduplex grades

  • Requires degreasing prior to use

  • Safety gear required; must be handled with care

  • Wastewater and residuals must be properly treated



Application

PELOX Pickling Solution T-100 Concentrate 1:1 is a powerful liquid immersion pickling concentrate for stainless steels. It is supplied in concentrated form and must be diluted 1:1 with water before use for effective removal of scale, heat tint, and corrosion.

Properties

  • Concentrated immersion pickling solution (dilution ratio 1:1)
  • Eliminates weld scale, discoloration, corrosion, and embedded particles
  • Chloride-free formulation
  • Usable in recirculation (loop) systems
  • Stable and effective with proper bath monitoring
  • Surface result: metallic clean, matte to satin appearance
  • Reaction time: 30 to 360 minutes

Usage Instructions

  • Always test before use
  • Pre-clean with PELOX FR-D (acid) or AR 90 (alkaline) cleaner
  • Monitor acid levels and metal contamination (iron) in bath
  • Use at 5–25 °C and avoid exposure to sunlight
  • Wear appropriate PPE and follow safety measures
  • Dispose of rinse water and waste responsibly

Compatible Materials

Austenitic stainless steels, Duplex, Superduplex

Application Areas

Large-scale immersion pickling for industrial stainless steel treatment

Technical Data

Feature Specification
State Liquid
Color Colorless
Odor Pungent
pH < 1
Density (20 °C) 1.15 – 1.20 g/cm³
Reaction Time 30–360 minutes
Hazard Symbols GHS05, GHS06 – Danger
Main Components Nitric acid (≤70%), hydrofluoric acid

    You are inquiring about: